High Productivity Disposable Mask Making Machine , Medical Face Mask Machine
Description
This Disposable Mask Making Machineis a fully automatic one-to-two mask machine, one body machine drives two ear band machines. After the main body machine outputs the mask body, the mask body sheet is conveyed to the turning mechanism by the conveyor belt structure, and the mask plate is flipped to the conveyor belt connected to the ear tape machine through the turning mechanism, and then the mask piece is conveyed to the ear tape machine through the conveyor belt. On the front of the first mask plate, finally, the mask sheet is placed into the mask plate of the ear band machine by pressing down by the air cylinder. The ear band machine then completes the welding of the ear band of the mask, edging, etc. to complete an ear band mask. Production of products.
Advantages and characteristics of the production line
1. Small size, small footprint, aluminum alloy structure, beautiful, strong and rust-free
2. High stability, low failure rate and good accuracy.
3. Computer PLC programming control, servo drive, high degree of automation.
4. Photoelectric (optical fiber) testing raw materials, avoid mistakes
5. The camera is a dual-machine mask, compared with the single-machine mask machine, high efficiency, with automatic packaging line, greatly save manpower and material resources.
Plant installation requirements
1. Ground load bearing: less than or equal to 500KGS/ m2.
2. Working power :220V+/ -5%, 50Hz, rated power about 15KW(including packaging machine)
3. Operating environment: temperature 10-35 degrees, humidity 3-35%HR, no flammable corrosive gas, no dust, sterile workshop.
4. Compressed air: 0.5-0.7mpa, using flow rate 300L/ min
|
Overall size(mm)
|
6800*3800*1900
|
|
Ply:
|
3 Ply Mask
|
|
Mask size(mm):
|
95*175
|
|
Materials:
|
Spunbond Nonwoven+Meltblown Nonwoven+Spunbond Nonwoven
|
|
Capacity(pieces/min):
|
90-110 (140,000pcs/day)
|
|
Compressed air(Mpa):
|
0.4-0.7
|
|
Power(Kva):
|
10 |
|
Operator:
|
1person
|
Main technical parameters
| Overall dimension |
Length: 6500mm
Width: 3500mm
Height: 1950mm |
| Operating height |
Ground to work table height: 850mm (adjustable) |
| Voltage |
AC 220V, 50HZ, 6000W |
| Working air pressure |
0.5~0.7Mpa, dry gas source Φ12mm |
| Air consumption |
250 L/min |
| Vacuum |
Equipped with vacuum pump, can be connected to customer vacuum source <-75kpa, 250L/min |
| Condition requirement |
Clean room Class 10 or less |
Professional design team
All machine parts we have designed by the solidworks, and designed automatic, only need one person operate the machine. Which help the manufacturer save the cost.
Professional manufacture team
We have the profession team for the machine fabricating and assembling. also all materials choose the GB stand aluminum plate and SS 304 steel. All electronic elelments choose the international brand.
Test work for all machine
Before delivery, we will make all prodution test for the whole machine, which to make sure no problem when customer get the machine.
FAQ
Q1: When Hosng Pack was founded ?
A: It started in 2007, till now it around 13 years experience in Packaging Industry.
Q2: How about your delivery time?
A: Commonly it needs 30 days for production, but if there is anything urgent, can be finished within 15 days if spare parts in stock.
Q3: What’s the warranty?
A: Warranty is 1 year, not including easy damaged spare parts, such as heater, belts, etc.
Q4: Can arrange technician to oversea for commissioning ?
A: Yes, we can if you need, but you need to pay the fees including: Visa charges, return ticket, accommodation and labor fees. We also accept you arrange technician to learn in our factory before shipping.
